What Are Requirements For Sets of photos or Drawings of Industrial Design?

Set of photos or drawings is one the most important documents of the dossier for registration industrial design. According to the laws on intellectual property of Vietnam, what sets of photos or drawings of industrial designs are required to satisfy which conditions?

In details, the following conditions are required for the sets of photos or drawings of industrial design:

-Photos or drawings must be clear and well defined; drawings must be presented with unbroken lines; the background of a photo or drawing must be monochrome and contrast with the industrial design; a photo or drawing must show only the product imbued with the industrial design sought to be protected (not accompanied with another product);

-Photos or drawings must show the industrial design on the same scale. The size of the industrial design shown in photos or drawings must neither be smaller than 90 mm x 120 mm nor larger than 190 mm x 277 mm;

-Photos and drawings must show the industrial design viewed in the same direction and in the following order: three-dimensional picture of the industrial design, front, rear, right-side-left-side, top-down and down-top shadows of the industrial design; shown shadows must be frontispieces.

-For an industrial design with symmetrical shadows, its photos or drawings are not required to show more symmetrical shadows, provided that such is clearly stated in the list of photos and drawings in the description;

-For the industrial design of an expandable product (for instance: box, package), shadows of the industrial design may be replaced with photos or drawings of the industrial design in an expandable state.

-Depending on the complexity of an industrial design, more photos or three-dimensional drawings from other angles, cross-sections or magnified pictures of parts, pictures of knocked down components of the product, etc., may be required to clearly show new and distinctive design features of the industrial design sought to be protected.

-For a product that have different usages (for example: a product with cover or foldable), there must be photos or drawings of its industrial design in different states.

-For the industrial design of a part of a complete product, there must be more photos or drawings illustrating the position for fitting or use of such part on the complete set of product.

-For each variation of the industrial design, there must be a set of photos or drawings fully presenting it according to the above conditions.

-For a set of products, there must be three- dimensional pictures of the whole set and a set of photos or drawings of each product in the set according to the above conditions.

If Client needs more information or request for legal advice regarding intellectual property matters, please contact with ANT Lawyers to be assisted.